TV Plasma, pozitionare?

dragii mei,
ne-am cumparat un Tv cu ecran plat si sotul meu are ganduri "negre" de a-l cocota undeva pe un perete in camera de zi.
aveti cumva vreo idee, care ar fi pozitia optima in camera? avand in vedere ca abia ne-am mutat si nu avem nici mobile, ar fi binevenit un sfat o idee sau un link.
va pup si astept pareri de la voi
Vio

andreeacc spune:

Nu stiu sa iti zic unde e mai bine sa il cocoti, asa ca uite sursa noastra de inspiratie, noi am ales solutia clasica...e pus pe mobilier...

http://www.plasmatvbuyingguide.com/1-introductiontoplasmatv.html

Plasma & Flat Screen TV Buying Tips


Plasma monitors are measured diagonally across the screen, as are other television sets and monitors. Plasma screens start at 32" and increase in size up to 63".

The typical sizes are: 32", 40", 42", 46", 50", 61", 63"

The most popular screen sizes are 32", 42" 50" and 61". Screens smaller than 32" are considered LCD monitors.

The first stage in selecting the desired plasma screen size should be to measure the space it's going in. When recessing the unit in a space allow at least 3" of open space at the top and adequate ventilation space behind the unit to allow heat to escape. Remember that most plasma TVs do not have built in speakers but do offer some type of attachable side speakers, so allow an extra 3-6" on each side if you plan to use these.

Size of Room/Viewing Area

Make sure you have adequate viewing space between you and the TV. With Plasma TV's becoming more and more popular these days, the temptation to purchase the largest screen possible is hard to pass up. However, you must have the proper distance to have the most pleasing viewing experience.

Rough seating to plasma screen distance recommendations are as follows: 32-37" screens may be viewed from 6 to 10 feet. A 42" plasma display may be optimally viewed from 10-14 feet. A 50" plasma display will look best from 12-16 feet.You should have at least 15 feet to work with when installing a 61-inch or 63-inch plasma screen.

Mounting Options

The following is a brief description of the most popular methods for mounting plasma TVs. Some manufactures will include a tablestand or mount on certain screens - check with your supplier for mode information.

Flat Wall Mount
Flat Wall Mounts are the most common mounting option for Plasma TVs for home or business use. This option is the least expensive and allows the plasma monitor to remain closest to the wall, adding under 2 inches to the depth. It is used in the home living room or the company boardroom to achieve the sleek appearance for which plasma tvs have come to be known.

Tilt Wall Mount
This mounting option is used when placing the plasma TV higher than the desired eye level. The user can pull the plasma monitor from 0°-15° degrees from the wall and tilt the unit from between 15° to 20° degrees - depending upon the brand. It is commonly used above fireplaces or for bedroom applications. It is also used for business to display the plasma in counter areas above head though it will normally have a ceiling mount option attached. The tilt wall mount adds from 4° to 6° inches to the overall depth of the plasma display when mounted.

Table Stand
The table stand is used for all table applications, boardroom or living room. These units are custom made to manufacturers specifications as each plasma display has its own requirements regarding how the stand fits the plasma. The stands will generally raise the height of the unit 2.5 inches from table to base of the unit. Some monitors include a table stand in the package. The table stand allows for a surprisingly sharp look and allows for maximum flexibility.

Plasma TV Cart
Typically used for business applications, this display solution us used for trade shows as well as roll up presentation use. It is used often in a courtroom setting or to mobilize up to the edge of a boardroom table for maximum visual presentation. It may include a platform for placing a DVD player, laptop computer, or VCR.



Articulating Wall Mount
This apparatus uses a swivel arm which folds up when not in use, allowing the plasma to be "flush mounted" like the tilt wall mount. It adds between 3 to 4 inches to the depth of the plasma mount depending on the manufacturer. It is used for maximum flexibility in Sports Bars, library studies, and commercial display operations. It can turn 120° degrees in either side to side direction and 0°- 10° degrees top to bottom tilt direction.

Ceiling Mount Options
The ceiling mount is normally used with the tilt wall mount and provides an attractive mounting options for airport displays, check out counters, hospital rooms, and bedrooms. Though the ceiling mount can be used with flat wall mount tilting the unit downward is normally necessary. Lengths of ceiling mount poles are variable depending upon customer needs. Standard lengths are 24 to 43".


Andreea si Sebastian - 07.10.2003

Am implinit 2 ani

www.snugglepie.com/ezb/273224.png" target="_blank">Cresc cate un pic in fiecare zi

Oana_B spune:

Cu riscul de a parea pisaloaga, va rog puneti traducerea conform regulamentului.
Merci.

Oana_B

viorela hoff spune:

Danke pt. link si text Andreea, am aflat ca pt. perete trebuie un dispozitiv special cu ajutorul caruia ecranul este rotit la gr. optimale, si asta mai costa vreo 200 si ceva de Eu, oricum etse binevenita si informatia voastra.
pupici Vio